RG316 vs RG58: Which coaxial cable is suitable for you?

RG316 cable

RG-316 will have a higher loss, but at 125 MHz, it should not be a problem for in-room distances.

Both are sufficiently flexible for use on a benchtop, but RG-316 is more so due to its smaller diameter. RG-316 is rated for repeated 1.5″ radius bends, while RG-58 (stranded) is rated for 3″ These are extremely conservative specifications, “repeated” referring to the thousands of times it will be bent when installed on a moving machine. If you’re only using your hands, you can safely bend them to approximately 1″ and 2″ in length.

RG-316 has a teflon dielectric that is resistant to high temperatures and can withstand soldering on a connector. The polyethylene dielectric of RG-58 will melt if a center pin is soldered to it. If you are purchasing finished cable assemblies, this is irrelevant.

RG-58 will most likely have a black PVC jacket with a slight rubbery grip. The jacket of RG-316 will be tan and significantly more slippery. As a result, RG-316 is more likely to become a nuisance by sliding off the bench.

What is RG316 cable used for

How far can you run RG58 cable?

RG58 cabling is a type of coaxial cable typically used in networking applications. It is available in a variety of sizes and can support up to 30 nodes over a distance of 185 meters. RG58 cabling is typically used for shorter runs or runs with fewer nodes, making it an ideal choice for small businesses or home offices. While it is not as fast or durable as some other types of cable, it is relatively inexpensive and easy to install. For these reasons, RG58 cabling is a popular choice for many network applications.

What is RG316 cable used for?

RG316 is a coaxial cable that is military-rated and can be used in a variety of applications, including the transmission of radio frequency signals, telecommunications, and high-frequency interconnections between PCBs in telecommunications equipment. The cable is made of dielectric material with a solid outer conductor and a stranded inner conductor. The dielectric material helps to reduce signal loss and the solid outer conductor helps to provide shielding from electromagnetic interference. The stranded inner conductor helps to improve flexibility and reduces fragility. RG316 is a versatile cable that can be used in a wide range of applications. It is durable and can withstand harsh environments, making it an ideal choice for military equipment, direct burial, and other demanding applications.

Amphenol CO-058BNCX200-012 Black RG58 Coaxial Cable, 50 Ohm, BNC Male to BNC Male, 12′

Looking for a top-quality coaxial cable that won’t let you down? Look no further than the Amphenol RG58 Coaxial Cable. This military-grade RG58C/U rated 50 Ohm coax cable features 95% braid coverage, making it perfect for a variety of applications. Plus, the impedance-matched Amphenol brand BNC connectors are pre-installed, so you can be up and running in no time. The non-contaminating black PVC cable jacket and molded strain relief system provide added durability, while the flexible design makes installation a breeze. Trust the Amphenol RG58 Coaxial Cable for all your coaxial cable needs!

Eightwood RG316 Coax Cable

Looking for a top quality RF coaxial cable to use with your electronic equipment? Look no further than the Eightwood RG316 Coax Cable. This 50-foot long cable is made of silver-plated copper clad steel for inner conductor, and has a 50 ohm impedance. It’s flexible and easy to work with due to its light weight and thin construction. Plus, it has a low loss at VHF, making it ideal for use with your scope, signal generator or frequency counter. Don’t settle for anything less – get the Eightwood RG316 Coax Cable today!

Author: James Core

I write dozens of helpful informational articles based on topics that I have identified again and again throughout my research and work experience. I am here to help you find the right CABLE AND CONVERTER for your needs.

Leave a Reply

Your email address will not be published.