How to fix the sunbeam electric blanket blinking?

how to fix sunbeam electric blanket blinking

What does it mean when your heated blanket is blinking?

If you have a Sunbeam electric blanket, you may sometimes experience the control panel blinking. This can be caused by a number of factors, but is usually due to a loose connection between the control and the module in the blanket.

To fix this problem, simply unplug the power cord from the wall outlet and check that the control is securely connected to the module. Once everything is properly connected, re-plug the power cord into the wall outlet and turn on the blanket. On a digital control, you should see flashing symbols and the display on your control will clear. With a few simple steps, you can easily fix this common problem and enjoy the warmth of your Sunbeam electric blanket.

Troubleshooting Your Sunbeam Electric Blanket

Check the Wiring

The first step is to check the wiring for any signs of damage or wear. You can do this by unplugging the power cord from the outlet and inspecting it for any frayed or exposed wires. If you see any damage, then the power cord will need to be replaced before you can use your electric blanket again.

Look for Obstructions

If there are no visible signs of damage on the power cord, then the next step is to check for obstructions inside the electric blanket itself. This could include things like lint or pet hair that has built up over time and is preventing electricity from flowing properly. To access these areas, you may need to remove a few screws and take off the bottom panel of your electric blanket. Once the panel is off, simply remove any obstructions you find with a vacuum cleaner or other tool.

Check Connections

Check all of the connections both inside and outside of your electric blanket. Inside, make sure that all of the wires are securely connected to each other and that none of them have become loose over time. Outside, inspect both ends of the power cord to ensure they are fully plugged into both your electrical outlet and your electric blanket itself.

Check Control Button Indicators

If your power light continues to flash after checking the power cord connections, the next step is to check the control buttons on your electric blanket controller. Each button should have an indicator light—if any of these lights are off or blinking, this could be causing your power light to flash. In this case, try resetting all of the buttons and ensuring that they’re turned off when you’re done using the blanket.

Replace Batteries in Controller

if none of these solutions work, consider replacing the batteries in your controller unit. The battery compartment may be located either on top or underneath the controller—simply open up this compartment and replace all of the batteries with fresh ones before closing it back up again. This should help clear up any issues with your electric blanket’s power light flashing.

If none of these troubleshooting measures work, then it may be time to seek professional help from an authorized Sunbeam technician who can provide a more thorough diagnosis and repair service if necessary. In any case, taking a few minutes to inspect your electric blanket for damage or obstructions can save you time and money in the long run—and help keep you cozy in bed all night long! So why not give it a try today? With these easy steps in mind, fixing your Sunbeam electric blanket blinking should be a breeze!

Author: James Core

I write dozens of helpful informational articles based on topics that I have identified again and again throughout my research and work experience. I am here to help you find the right CABLE AND CONVERTER for your needs.

Leave a Reply

Your email address will not be published. Required fields are marked *